Classic chiffon cake cut open to show its fine crumb

Why Does Chiffon Cake Shrink After Baking?

From the MolalaCook kitchen · 烘焙手記

Why Does Chiffon Cake Shrink After Baking?

戚風蛋糕點解出爐會回縮?

Before you change the recipe, think back to the moment the cake lost its shape. A dip in the oven, a cake that slips out during cooling and a waist that appears after unmoulding point you towards different checks.

Find the symptom ↓
Classic chiffon cake cut open to show its fine crumb
Sunken centreCheck the bake
Falls from tinCheck the sides
Pinched waistCheck the crumb
Dense streaksCheck the fold

When did the cake lose its height?

A chiffon will settle a little as it cools. A deep hollow, a damp band or a squeezed-in middle is worth investigating. Keep one slice and look at it at eye level. Where is the crumb wet or dense? Was the cake still attached to the tin when it sank? Those observations tell you more than the colour of the top. The photos below show the checkpoints in successful MolalaCook bakes, so you can compare your own batter, tin and cooling setup.

Read the symptoms 逐步排查

01

The centre dips on the way out of the oven

Cut across the dip once the cake is cool. If the middle is gummy and compresses into a wet line, check whether it had time to set before blaming the meringue. A brown top can hide a soft centre. In the classic six-inch tube-pan chiffon, the oven is preheated to 180°C, then lowered to 170°C for a 30–35 minute bake. The surface should feel dry and spring back lightly. Those cues belong to that pan and batter.

If the top coloured early but the middle was wet, first check your oven temperature and rack position. Copying the dial setting from another oven is less helpful than finding out when the centre of your own cake actually sets.

Freshly baked tube-pan chiffon cake
The classic chiffon straight from the oven. Surface colour is only one of the checks.
02

It slips out as soon as you turn the tin over

Check the surface that was holding the sponge. In a tube-pan chiffon the batter needs clean, ungreased walls and a centre tube to cling to. Butter, a nonstick finish or paper running up the sides can take that grip away. If a wet layer also stuck to the tin, check doneness as well: changing the pan cannot set an underbaked centre.

For the next bake, use the specified ungreased tube pan and leave the sides bare. Invert it with clearance beneath the cake so the dome doesn’t rest against the counter.

Inverting the hot chiffon pan
Turning the hot tin over in the hojicha chiffon video. The sponge stays in the pan to cool.
03

It looked fine until the sides pinched in

Was the pan still warm when you freed the sides? A delicate crumb can buckle under its own weight if you peel it away too early. Leave it upside down until the pan and cake are cool throughout. Then release the outer wall and centre tube gently, without pressing the whole cake inwards.

Look at the slice again. Even, springy crumb with one dent where you gripped it points towards handling. A damp, tight band all the way round sends you back to the bake. A narrow waist by itself doesn’t identify a single cause.

Releasing the baked chiffon cake from the metal tube pan
Releasing a cooled rice-flour chiffon from its tin. This is the stage to protect the sides.
04

It was already short before cooling

Now look earlier in the bowl. In the classic recipe the sugar for the whites goes in gradually, and the finished meringue holds a firm peak. A loose foam won’t carry the batter well. Dry, clumpy whites take extra mixing to blend, which can knock air out.

Fold in batches, sweeping through the bottom where the heavier yolk batter collects. Stop when the colour is even. A ribbon of unmixed white or a dense streak of yolk batter in the slice is a more useful clue here than another five minutes in the oven.

Folding meringue into rice flour chiffon batter
Meringue being incorporated in the rice-flour chiffon video. Look for an even batter before filling.
✦Does a cracked top mean my chiffon has failed?

A split dome can sit above a light, even crumb. Check whether the centre springs back, how the cake cools and what the cut slice looks like before changing the temperature just to smooth the top.

✦Can I use my six-inch springform pan instead?

The classic recipe uses an ungreased 15 cm tube pan about 7 cm tall. A flat-bottom springform of the same diameter changes both the centre support and the distance heat travels. If you own a different tin, start with a recipe written for it. Compare the pan shapes in the bakeware guide.

✦What should I change first?

For a gummy centre, investigate oven temperature and doneness. For a cake that dropped cleanly from a greased tin, change the pan preparation. For one that compressed as you released it warm, change the cooling time. Keep the other variables steady so the next slice tells you whether the change helped.

Tools for this bake

Back to blog

Leave a comment